Archive for July, 2009

White Incase Slider Case for iPhone 3G and 3GS Unboxing

IMG_0188.JPGNow I’ve been going on about it for a couple of months now, if not more, that I need a new iPhone case.  It’s been in a cheap transparent plastic one since last September and give it its dues, the phone has been protected well.  But it was getting scratched and I knew the time was near the end so I began scouting around for a replacement.  With recommendations from you guys and some close friends I went for the Incase range and the White Slider Case for the iPhone 3G.  Now yes I’ll admit it the RRP price of £25 did knock me back but I bit the bullet and got it.  Was it as good as I heard it was? Here are my first thoughts…

Ok so there isn’t an awful lot to talk about with the case, as the main discussion point is how well it protects the device and at the moment I haven’t had enough experience with it; but when I do I’ll get right back to you lot.  On the overall look of the device, I chose the White colour because I liked the clean contrast look compared to the black iPhone. Don’t worry though as there are many other colours available from bright green to grey and also a metallic colour range to satisfy your needs.  Obviously it has all the ports open so you can actually use the thing but there is sufficient protection around them and this is same around the whole iPhone.  When you look at it side on, it does make the iPhone thicker but then I guess how else are you going to protect it if you are sometimes clumsy like me? :)   As mine wasn’t from the metallic range it has a very smooth, you could say slippery, feel which is very nice but if you aren’t always aware it could probably slip out of your pocket.  The biggest advantage for me was a case that you could easily take off so I could dock the iPhone and this Incase does that perfectly.  You don’t understand how much easier (and tidier) it is jsut to dock the iPhone instead of finding the cable and laying it on the table…maybe it’s just me.

Overall at this initial stage I’m impressed with the Incase Slider Case and so far the quality is solid, so let us see how long it lasts the rigorous testing of daily use.

The Verdict: Devolo dLan Highspeed II Starter Kit Review

photo.jpgSo I’ve had the Devolo dLan Highspeed II Starter Kit for a couple of weeks now and with my experience, it is time to send my review over to you guys.  If you haven’t seen the unboxing go and watch that video then come back and see the review video.  Basically I needed a new way to connect my Xbox 360 up to Live as well as something as a backup to keep internet in my room.  I could have gone with another wireless bridge, although they are hard to find, but I decided on these growing gadgets that use your homes internal power lines. So here’s the Devolo dLan Highspeed II Starter Kit but has it worked as expected?

Just up front you need to know that (as expected I guess) the box comes with everything you need to get started. 2 Ethernet cables and 2 plugs.  There is also a CD but this isn’t necessary to start with and only to configure security on the plug devices.  There are minimal instructions and to be honest they are nice and simple which is great considering it’s exactly all you need. Simply plug one dLan into the power socket with an Ethernet cable from it to the source, so in my case the internet router.  Then plug in the second dLan into another power socket near your destination device, for me the Xbox 360, and once again hook up the Ethernet cable between these two. That it? Yes, it really is easy. Now admittedly a wireless bridge isn’t rocket science to install and configure, but with the dLan you don’t need to fiddle with all the choosing which wireless access point and all the codes required to get them talking to each other.  So with that done the dLan lights started blinking like a Christmas tree at me and hey presto they were talking to each other! I turned on the Xbox just to make sure and within seconds I was connected to Xbox Live. The dLan Highspeed II did exactly what Devolo said on the box and so far the experience was heavenly.

So what about the design and looks of the thing? Well Devolo have gone with a blue design which is reality isn’t as bright as it appears on the box.  Other competitors have gone for a more neutral white or grey so this one may stick out in your living room’s colour scheme.  However the dLan cool design is only three simple LEDS showing power, device connection and connection to other dLan device. No need for troubleshooting manuals here, it’s very easy to see what’s wrong if your connection goes haywire.  Because it is a power plug the dLan is easy to conceal however there is a slight protrusion which can cause problems with tight small power plug holes making the one next to it unavailable.  Also, where it is probably used near a lot of electronics, it is hard to have a wall plug on its own so mine had to be used on power extender even though it recommends not to.  However with my experience so far it has still worked fine with no drop outs and I haven’t noticed a speed decrease.

So I’ve already mentioned the easy installation but the continued ease of daily use is a big advantage. On that note I have had no problems so far. The box touts it is very GREEN and energy efficient which is a thumbs up nowadays although in my opinion they probably could have saved some more by making the box smaller with only 4 real components inside but that’s just me being pedantic. The great power saving feature is a nice touch, in this eco-friendly world we live in, where the power light goes orange in a sort of standby mode and comes straight back to life when you need it.  My experience is with two devices and you can have more than two and they can be just as easily installed in the network but how well that works is questionable. Devolo say: The optimum application is no more than 15 dLAN adapters in a fully loaded HomePlug network.  I say: If you’re going to have lots, I recommend purchasing a proper wireless network.

The range is 200m and security features are customisable (but not necessary) via the CD so that seems good. Bear in mind if you have no security set up on it then in theory your neighbour could buy a dLan plug and poach off your connection…  I’m not totally sure how the dLan works, apparently it goes through your house power wires but if you have different lines upstairs and downstairs some people have had problems. Although from the Devolo site: Yes -- This is a normal situation, and as long as there is one electricity meter in the house/ building; generally, all the ring mains converge there and the data signal can cross ring mains

Overall my Devolo dLan Highspeed II is coexisting with my wireless network and provided a slightly cheaper different option to get my Xbox back online. There are competitors that have similar products like Belkin and Netgear however Devolo were the cheapest for the better speed when I looked. It can handle up to 85Mbps however to be honest all I’ll be using it for is internet access and I’ll never get better than 5Mbps at the moment but I guess it’s future proof.  So it does exactly what it says on the box and works perfectly for what I need it to.  So if you need to make a connection, whether it be wired or wireless, check Devolo out!

Keep the Original Timestamp when converting .MOD files

I’ve helped many people with my guide on how to convert .MOD files and my other Canon FS100 related posts, however there can be a problem when you convert the files after you’ve shot the video.  It will alter the timestamp to when you converted it and isn’t really useful if you are trying to keep everything in order. So a member of our community xxfunkxx to the rescue! Here is his guide to keeping the original timestamp and it is very useful. Thanks to him and if anyone else has any information for future posts don’t be afraid to email me at daz@daz4590.co.uk

To convert the .mod video files recorded with the Canon FS100 into quicktime movies I use Mpegstreamclip on my Mac. I found it very useful for my archive to have the original date and time information of the recorded .mod files in my .mov files. In my case a small bash script does this for me. Before running the script I assume that the .mod and .mov files are in the same directory! Like this:

Bash script .Mod files

Download the script

Unzip and copy it into the same directories where the video files are located (e.g. on the Desktop with a subfolder video). First we need to make the script executable and then run it. Open the terminal (located under Applications/Utilities). After the prompt we type these 3 lines:

$ cd Desktop/video
$ chmod +x keep_original_timestamp.sh
$ ./keep_original_timestamp.sh

So that’s it. Now the Quicktime movies should have the same timestamp as the mod files. The bash script that does our work looks like this:

#!/bin/bash
# keep original time stamp from Canon FS 100 .MOD files
ext_MOD=”.MOD”
ext_MOV=”.mov”

for i in *.mov; do
x=($i)
echo $x
filename=${x/%.mov/}
filename_extMOD=”$filename$ext_MOD”
filename_extMOV=”$filename$ext_MOV
echo “filename_extMOV” $filename_extMOV
fileinfo=$(/usr/bin/getinfo $filename_extMOD)
array=($fileinfo)
original_timestamp=”${array[9]:6:4}${array[9]:0:2}${array[9]:3:2} \
${array[10]:0:2}${array[10]:3:2}”.”${array[10]:6:2}”
echo “original_timestamp” $original_timestamp
# has to be CCYYMMDDhhmm[.SS]
touch -t $original_timestamp $filename_extMOV
done
exit 0

If you have any trouble please contact me: xxfunkxx@web.de

Renault World Series at Silverstone 4th/5th July 2009 Video Compilation

photo.jpgOne of the best weekends in a long time as I went to Silverstone race track for the annual Renault World Series. A mixture of races and promotional events all for FREE! Would definitely recommend it to anyone with time on their hands and an interest in motorsport.  Saw the Formula 3.5 and Renault 2.0 series as well as Meganes and Clios battle it out around the track. Couldn’t have asked for better weather although the sunburn hurt a bit on Monday morning. Here’s a compilation of the whole weekend from several angles including the Renault F1 car. Enjoy!

Devolo dLan Highspeed II Starter Kit Unboxing

photo.jpgThese new devices are starting to edge into the market now and remove most of the problems of open wireless networks.  Devolo offer a small easy to use alternative to wifi networks. Now my Belkin Wireless Bridge was starting to die so this seemed a good idea. All you have to do is plug in the adapters, one into the router and the other into your device which in my case is the Xbox 360. Simple!

In the Devolo dLan Highspeed II Starter Kit there are 2 Homeplug adapters as well as 2 small ethernet cables.  It is a really easy setup so here is the unboxing and I’ll do a review soon after I’ve experienced it.